Need to do an intra-oral repair on a temporary crown or bridge? EXACTA FLOW is the perfect complement to EXACTA Temp XTRA.

EXACTA Flow-lc is an advanced light curing flowable composite. EXACTA Flow-lc material is a versatile flowable composite with great strength characteristics with comparable physical properties to the best hybrid composites. The material is not too sticky and makes handling easy. The viscosity prevents the material from slumping, while still flowing on the surface for great coverage. EXACTA Flow-lc material cures in only 3 seconds with high speed cure lights or only 10 seconds with standard halogen lights. Many of our customers use EXACTA Flow-lc as an add-on material for EXACTA Temp Xtra, as the composite is shade matched exactly to the temporary material.

Profil Flow
Flowable Restorative Material

Manage your costs without compromising quality.

Compares to:
Filtek Flow, Revolution, Esthet X Flow, TPH# Flow, Heliomolar Flow, Clearfil Majesty, and Flow it Beautiful.

Profil Flow by Silmet offers high compressive and tensile strength for optimal wear resistance based on the advanced resin technology of ProFil. It is also a visible-light activated, radiopaque, flowable composite. The excellent  owable consistency characteristics makes it an ideal composite for filling cavities.

Uses
Base/liner in Class I & Class II restorations
Repair of resin, porcelain and acrylic temporary materials
Pit & Fissure sealant
Restoration of minimally invasive cavity preparations
Undercut blockout

Features
Excellent esthetic properties
• No oozing or slumping
• Perfect for minimal invasive restorations
• Low Viscosity
• Maximum versatility
• High polish retention & stable color match
• Long term fluoride release
• Low shrinkage
• Indications
• Class III, Class V, Smaller Class IV restorations
• Base/liner in Class I & Class II restorations
• Repair of resin, porcelain and acrylic temporary materials
• Pit & Fissure sealant
• Restoration of minimally invasive cavity preparations
• Undercut blockout

KitContains 4x1gSyringes

Light activated, high viscosity flowable composite designed for use in class III and V restorations, and select IV aesthetic restorations. Its high viscosity makes it easy to place and finish.

•  Stackable 
•  Quick Curing 
•  Contains Fluoride
•  Hybrid Strength with microfill polish-ability
•  High radiopacity - easy to distinguish in x-rays

Listed in the 2008 “Buyers Guide - Best Product of the Year”
from a reputable evaluation non-Profit Institute.

(4-2gm Syringe Shades A2, A3, A3.5, B3 + 20 tip)

For professional use only. This product cannot be purchased for personal or home use.

Light optical effect means no more color shade headaches.

A new award-winning colorless light cured composite is available by Oxford Scientific called SpheriChrome. This product virtually eliminates the need to shade match each restoration, saving significant chair time.

How SpheriChrome Works

Case Report 1:

A patient exhibited wear and occlusal carries in her mandibular left first and second molars (Figure 1). SpheriChrome flowable was applied in several increments. The composite was contoured with a carbide finishing bur and polished with a composite polishing brush. The final result can be seen in Figure 2.

Case Report 2:

In Figure 3, the patient wished to have the central diastema closed so it was decided to place direct composite veneers for all four incisors. SpheriChrome Blocker was used only at the interproximal area between the central incisors. Regular SpheriChrome was layered over the entire facial surfaces of each tooth. The final result can be seen in Figure 4.

Case Report 3:

In Figure 5 you can see that the patient had experience chipping and breakage of the two central incisors. With minimal preparation and a slight bevel, we were able to add Figure 5 Figure 6 Figure 7 SpheriChrome to restore the original shapes. A small amount of SpheriChrome Blocker was used at the mesial corner of the left central incisor and SpheriChrome regular was overlayed on the facial aspect and incisal edges. The final result is shown from the facial aspect in Figures 6 and 7.

SpheriChrome Blocker is available for use when masking for tooth discoloration or extended Class III and IV cavities. SpheriChrome Blocker can also be used as a first layer for class I, II and V cavities.

Surface Roughness Chart

Having a smoother surface when finishing the tooth is very important to the life and apperance of the restoration. My clinical expereance shows that the surface of SpheriChrome is significantly smoother than Omnichroma. This means that less biofilm could form on the tooth and create apperance and other problems.

Shrinkage in Water (24 Hours)

It is well known composite shrink and anything that can be done to reduce that shrinkage will benefit in the life of the restoration. The lower the shrinkage the less chance for micro leakage and alll the problems it can cause from discoloration to secondary caries.

SpheriChrome produces excellent restorations with less effort and fits easily into the everyday office procedure while delivering on claims to virtually eliminate shade matching. It saves time, yields improved restorations, reduces inventory, and increases patient flow in the office. Other factors such as wear, surface roughness, and shrinkage can also be considered for the short and long term appearance in the oral cavity. Tooth color can vary from patient to patient depending on their natural shade and lighting conditions.The determining factor for a successful restoration is the appearance as perceived by the patient and dentist under various conditions over time.

SpheriChrome MSDS
SphericBlock_MSDS